Due to high technologically design used in Anti-static bar it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Anti-static bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti-static bar will supply machines to perform hygienic, safe and qualitative production. Anti-static bar can be designed in different lengths to satisfy the requirements of needs of application.

Antistatic bar separates the air molecules to positive and negative ions. Due to principle of work of antistatic bar the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.

Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length.

General Specification

Easy to install / High performance / Safety / Long life

Applications

Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding

Product Webiste URL: http://www.puls.com.tr/urun_eg.aspx?ID=141

High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.

Connection

Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.

Variations of product

- 1 in 1 out without resistant

- 1in 2 out without resistant

- 1 in 4 out without resistant

- 1 in 1 out with resistant 40 mohm

- 1 in 2 out with resistant 40 mohm.

- 1in 4 out with resistant 40 mohm.

- 1 in 1 out with resistant 80 mohm.

- 1 in 2 out with resistant 80 mohm.

- 1 in 2 out with resistant 80 mohm.

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=552

It is necessary to have the tag to fit the mould while the production of In-Moulding applications is in process. Due to the high performance of the 5 PIN IML titanium needles, the tag gets glued to the mould without problems. The static electricity being loaded on the tag due to the 5 PIN IML titanium needles provides perfect loading on the tag surface and especially on the head without causing any distortion or trail.

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=550

High Tension Strength (IML Foam) used on the front face of static loading apparatuses is produced only by PULS ELECTRONIC and is applied in its own devices as well as presented to other users occupied with the same area. Given below porper utilization of the IML Foam supplies a long-time work without causing any problem.

General Areas of Use

- In IML (In-Mould Labeling) Robots,

- In-Mould process loaded manually

- Any kind of label loading process that can be loaded statically

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=493

Puls Perforation Detector is used to detect perforation on any material in packaging industry. Especially it is useful in bag making machinery to count the bag numbers by detecting and reporting the perforation. Its detection capacity is 900 pcs/min. Output voltage can be adjusted between 6kV-21 kV by rotating and fixing the knob on the front panel. The leds on the front panel show the high voltage level. If perforation is detected, the count led flashes. The high voltage bar or probe with one emitter pin is connected to the output of the equipment and it is mounted above the web moving on grounded surface. If a spark occurs from the high voltage bar to the earth via perforation, detector will report it by a 30 msn opto coupler pulse output.

General Specifications

Easy to install / Long life / Low cost

Applications

Counting at bag making machine / Capillary leak detection in plastic tubes / Hole detection on silt thermophore / Hole detection on plastic cups and bottles / Leak detection on plastic materials

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=442

Puls Charging Bar device is utilized in industry for sticking materials to any surface or to each other. The sticking should be without any defects so then the materials are being unstuck, they should not damage the surface of the material. By utilizing Puls Charging Bar high resistant materials such as paper or plastic now can be easily clamped to surface. By using ionization system electrostatic charging generates the charger system by means of static generator and charging bar.

Charging bar is also designed to use charging in some quantity. Due to resistant connection to high voltage it does not emit a spark and enhances safety of work. Power supply voltage should be adjusted according to positive and negative polarity of charging bar. In sticking application charging bar should keep the distance to being charged materials in 10-20 mm.

Puls charging bar has an aperture behind, which by putting inside of it a plastic bar with M8 x 60 size, supplies simple and safe installation to any machine. To make static charge and sticking applications work properly it is necessary by using the most proper ionizing system to provide neutralization before two materials would be stuck to each other.(see Puls Static Elimination)

General Specifications

Easy to install / Resistively coupled / Spark-free

Applications

In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=153

Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit’s output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-120kV and as to current it is between 0 -1,25mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.

Static Generator provides convenience in its using. It is easy to install. The front panel turning to 180° was made to archive the easement in use. Static Generator is fitted out of digital output setting and 4xHV output to utilize the high voltage applications and charging bar.

General Specifications

Easy to install / Digital output setting / Rotating front panel by 180° / 4 x HV output

Applications

In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=548

Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit’s output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-100kV and as to current it is between 0 -1,5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.

Static Generator provides convenience in its using. It is easy to install. The front panel turning to 180° was made to archive the easement in use. Static Generator is fitted out of digital output setting and 4xHV output to utilize the high voltage applications and charging bar.

General Specifications

Easy to install / Digital output setting / Rotating front panel by 180° / 4 x HV output

Applications

In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=547

Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit’s output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-60kV and as to current it is between 0 – 2,5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.

Static Generator provides convenience in its using. It is easy to install. The front panel turning to 180° was made to archive the easement in use. Static Generator is fitted out of digital output setting and 4xHV output to utilize the high voltage applications and charging bar.

General Specifications

Easy to install / Digital output setting / Rotating front panel by 180° / 4 x HV output

Applications

In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=545

Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit’s output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-30kV and as to current it is between 0 – 5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.

Static Generator provides convenience in its using. It is easy to install. The front panel turning to 180° was made to archive the easement in use. Static Generator is fitted out of digital output setting and 4xHV output to utilize the high voltage applications and charging bar.

General Specifications

Easy to install / Digital output setting / Rotating front panel by 180° / 4 x HV output

Applications

In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding

Product Website URL: http://www.puls.com.tr/urun_eg.aspx?ID=544