http://www.staticequipment.net Static Elimination, Static Eliminator, Static Application, Charging Bar Tue, 22 Jul 2008 13:59:57 +0000 http://backend.userland.com/rss092 en When plastic parts are placed ın a vibrating bowl feeder, the friction causes them to charge. The charged parts then can jump out of the bowl, stick to machine casing and other earth potentials or cause mısfeedıng. By positioning a PULSElectronic Pulse DC ... http://www.staticequipment.net/index.php/other-applications/vibratory-bowl-feeder-application-sheet When laminating or bonding two or more surfaces together, problems can arise when statıc charges can force the surfaces apart. If using an adhesive or weld tool, you require the surfaces to be flush and without creases or curls. By passing the material ... http://www.staticequipment.net/index.php/other-applications/laminating-application-sheet Plastic parts when stored ın a collection container, typically after injection moulding will carry a statıc charge. Although the charge on each ındıvıdual part may be low, the accumulative charge will be very high. A small moulding may have only 10v of ... http://www.staticequipment.net/index.php/other-applications/esa-on-plastic-parts-application-sheet Labels can be misaligned or repelled from charged bottles due to large static charges which are generated as the bottles move through conveyor systems. The bottles encounter high levels of friction which charge them. When the bottles are posıtıoned to have ... http://www.staticequipment.net/index.php/other-applications/multi-head-labelling-machine-application-sheet After moulding, many plastic parts have further manufacturing process to go through prior to packing and shipping. If parts are to be painted, the high levels of statıc which are generated ın the moulding process attract dust, dirt and other airborne contamination ... http://www.staticequipment.net/index.php/other-applications/contamination-on-plastic-parts-application-sheet-2         Two different colours of chocolate are injected into the mold as shown in the figure. If these two products have the same static charges, they push each other and if they have the opposite static charges, It causes form changing of the chocolate. In addition ... http://www.staticequipment.net/index.php/other-applications/chocolate-manufacture         Static charges on a weigher cause some problems like unpleasant operator?s shocks, data and indicator errors, fault weight of the material and changing weight of the material. Because, dust and particules adding to the material change the weight if you use labratory weigher. If H&O Antistatic bars ... http://www.staticequipment.net/index.php/other-applications/electronic-weigher-static-application As PET bottles travel at high speed along conveyor lines the friction generates high levels of statıc electricity. If they spark to earth, the omitted radio wave can affect electrical circuits and metal detectors. It is also possible that as the bottles ... http://www.staticequipment.net/index.php/other-applications/plastic-bottle-conveyor-lines-application-sheet After moulding, many plastic parts have further manufacturing process to go through prior to packing and shipping. If parts are to be painted, the high levels of statıc which are generated ın the moulding process attract dust, dirt and other ... http://www.staticequipment.net/index.php/plastic-applications/contamination-on-plastic-parts-application-sheet During the weaving and the tranfer of the strings unfastened in the warping machine, static charges are generated on the products. Static causes the product to cling or attract onto the frame sides and contamination of product due to ... http://www.staticequipment.net/index.php/textile-applications/textile-machine-static-application