During the manufacturing process, large statıc charges build up. These are not a factor as the bags are under tension from either the machine or the grippers after cutting. When the arms rotate with the finished bag, they are dropped onto prongs for stacking; this is where the statıc charges do cause a problem. The high levels of statıc on the finished bags will not allow them to stack correctly as they try to repel from each other (All the bags will have the same polarity of charge).

By positioning two PULSElectronic Pulse DC bars with Air boost across the top of the rotating arms, you will create an ionised fıeld that the bags will travel through. As the bags enter the field, they neutralise and then will correctly stack on the collection prongs.